Altek Optic Technology Co.,Limited
WE ARE INVOLVED FIBER OPTIC INDUSTRIAL

Phone:+86-755-23033329

High Density Loaded 24F Fiber Optic MTP LC OM3 Fan Out LGX Module Cassette

High Density Loaded 24F Fiber Optic MTP LC OM3 Fan Out LGX Module Cassette

Technical Information: MPO/MTP® Cassette is a high density pre-terminated fiber optic system designed for data centers, storage area networks and local area networks.

Product Details

Technical Information:
MPO/MTP® Cassette is a high density pre-terminated fiber optic system designed for data centers, storage area networks and local area networks. This innovative system can reduce installation time and space, makes application simple : mount the cassette, pull or place the cables and plug the cables into cassette. Whether the distance between devices are a few feet or hundreds of meters, the data rates are 100 Mb/s, 1 Gb/s or even 10 Gb/s, the MPO/MTP® optical fiber solution is an excellent choice. MPO/MTP® Cassettes are available in 12 or 24 fibers, multi-mode ( 50/125, 50/125 OM3, 62.5/125) or single mode versions and connectorized with SC, LC.


Basic characteristics:
► Factory terminated & tested with guaranteed quality;
► High density to dramatically save space;
► Optimize network performance;
► The best solution covers all fiber optic cabling needs in all areas of Data Center.


Specification:
MPO/MTP® Cassettes with LC or SC connectors have optimized optical performances: a maximum Insertion Loss of 1.3 dB per cassette and a minimum Return Loss of 20 dB(Multimode), 55dB (Single mode) per cassette. Each cassette is small in size. On the back side of the cassette are one or two 12-fiber MPO adapters. On the front side of the cassette may be 12 SC simplex ports or 6, 12 LC Duplex ports.


Application:
► Data Centre Infrastructure;
► Storage Area Network- Fibre Channel;
► Parallel Optics;
► Infiniband;
► Emerging 40 and 100Gbps Protocols.

image001.jpg


Mechanical Technical:

image003(001).jpg


General Connector Specification:

Parameter

Single-mode

Multi-mode

Basic

Fiber connector

FC, SC, LC, ST, MU, MTRJ, MPO

Ferrule End-face

PC

UPC

APC

UPC

Insertion Loss

≤0.2dB

≤0.2dB

≤0.3dB

≤0.3bB

Return Loss

≥50dB

≥55dB

≥60dB

≥35dB

Ceramic Ferrule Specification

125.5um concentricity deviations:
<=1um

127um concentricity deviations:<=3um

Suitable Fiber

9/125um

50/125um,62.5/125um

End-face Geometry

Radius of Curvature

7~25mm

5~12mm

N/A

Fiber Protrusion

≤50nm

≤100nm

N/A

Fiber Under Cut

≤100nm

≤100nm

N/A

Apex offset

≤50um

Mechanical

Exchangeability

≤0.2dB

Salt Spray

≤0.1dB

Drop

≤0.2dB(1.5M, 5 drops)

Vibration

IL ≤0.2dB(550Hz, 1.5mm)

Repeatability

≤ 0.1dB(1000 times)

Durability

> 1000 times

Operating Temperature

-40℃ ~ +85℃


The basic division of MTP® connectors:

Type and Color
Code Connectors

Insertion
Loss (IL)

Optical
Return Loss (RL)

Operating
Temperature

Single-mode MTP® Elite® Connector

0.10 dB Typical (All Fibers) 0.35 dB Maximum (Single Fiber)1

> 60 dB (8°Angle Polished)2

-40℃ to 75℃

Single-mode MTP® Standard Connector

0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1

> 60 dB (8°Angle Polished)2

-40℃ to 75℃

Multimode MTP® Standard Connector

0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1,3

> 20 dB (0°Flat Polished)2,3

-40℃ to 75℃

1 IL test according to IEC 61300-3-4;
2 RL test according to IEC 61300-3-6;
3 Tested with proposed encircled flux launch condition on 50μm fiber & 850nm per IEC 61280-4-1.


High Density MTP®/MPO Cabling System In Dada Center:

image005(001).jpg

image007(001).jpg

image009(001).jpg


Ordering Guide:

Product Description

MTP/F/PC - LC/UPC/DX - OM3 - 12B - B2.0 - 1.5M/0.6M - LSZH - Aqua - A

         1                    2               3         4        5              6                7            8      9

1 - Connector A

MTP/F/PC: MTP Female,PC polish; MTP/F/APC: MTP Female,APC polish;
MTP/M/PC: MTP Male,PC polish; MTP/M/APC: MTP Male,APC polish;

2 - Connector B

LC/UPC/DX;LC/APC/DX;LC/UPC/SX;LC/APC/SX;LCP/UPC;LCP/APC;
SC/UPC/DX;SC/APC/DX;SC/UPC/SX;SC/APC/SX;FC/UPC;FC/APC;ST/UPC

3 - Fiber Mode

OM1, OM2, OM3, OM4, OS2, G657A1

4 - Fiber Count&Type

12R: 12F Ribbon; 12BR: 12F Bare Ribbon; 12B: 12F Mini Round Cable

5 - Breakout Type

B2.0: 2.0 fan-out with splitter kit.

6 - Length

1.5M/0.6M: Cable total length1.5M, fan-out length 0.6M, etc.

7 - Cable Jacket Materials

LSZH,OFNP,OFNR,PVC

8 - Cable Jacket Color

Aqua (OM3,OM4) Orange (OM1,OM2), Yellow (SM).

9 - Polarity

A: Type A; B: Type B; C: Type C.


If you are satisfied with high density loaded 24f fiber optic mtp lc om3 fan out lgx module cassette, welcome to wholesale our quality products. As a professional manufacturer and supplier, we also offer the customized service. For more info, contact our factory now.

Information
View Our Events Calendar

2018

Redstarv

© 2017 | PRIVACY POLICY

Latest Posts
Online Support

Tel:+86-755-23033329

E-mail:sales@altekfiber.com

Get in Touch
Home | About Us | Product | News | Exhibition | Contact Us | Feedback | Mobile | XML| trade-global.com